Transit Lounge

Transit Lounge is the name of a community in Auroville where a group of movable houses will be build.

Introduction

On friday April 15th 2011 l'Avenir d'Auroville presented the idea of a new community. It will only be for dis-mountable housing and they called it "Transit Lounge". Recordings of the event are on Auroville Radio website available[1] along with the slides of the presentation in PDF format[2]

Parameters and ideas

The Transit Lounge is seen as one of the interim solutions to the housing crisis affecting around 175+ Aurovillians and Newcomers (according to the recent housing survey). This project would aim to give people a breather by providing a low-cost dismountable house for a limited period of time - currently set as 2 years. This time would help people, get oriented to their permanent housing & work/community options in Auroville.

• The site will be designed for usage of a maximum period of 10 years.
• Consisting of dismountable houses (currently 8 different types).
• The residents can stay there for a period of up to 2 years, with the possibility to extend their stay for another 2 years on condition, that they have signed into a new housing project.
• The project will have a large centrally located Common House with shared kitchens/dining areas and ample number of bathroom/toilets. Each unit will have its own bathroom with compost toilet, shower and wash facilities, to reduce infrastructure costs all bathrooms will be centrally located together. There will be one  flush toilet in the Common House for comfort value and guests use.
• Kitchens, there could be 8 – 10 people sharing one “kitchen” space. Four kitchens are planned in the same building, but there also needs to be the possibility of smaller groups using a kitchen.
• Dining, lounge and internet space will be designed for common use with lockable facilities for safety.

Finance

The finance of the common infrastructure is being discussed, the ideas so far are:

• Totally pre-financed by Auroville, with the inhabitants contributing a monthly rent towards the common infrastructure for paying off the infrastructure over the entire period (10 years) of the project and maintenance.
• The inhabitants share the cost of the common infrastructure and transfer their part to the next inhabitant when they move to a permanent dwelling.

Other considerations.

• The site plan will be designed as an output of a site-planning skill-share which would be facilitated by the by a team at L’avenir with support from EartHauz and other interested architects.

• Community spaces would be designed to be used by individuals, families or the group of residents.
• Units would be designed to avoid noise disturbance to neighbors
• Address private and semi private spaces as in the orientation of covered terraces and garden spaces.
• Address sight protection from the road, common areas and neighbors.
• Kitchen should be fire, ant, bug and mosquito proof.

Other parameters

The site will be for up to 30 units (min. 15 initially) which can accommodate 40 – 60 people.

The Transit Lounge project is a transition / mobile housing site, meaning that the site is temporary, thus no permanent houses will be built on the location for the next 10 – 15 years.

The houses are dismountable not to save cost, but to keep the character of the project temporary. The houses have to be dismountable in order to open this site for the period of the project. Dismountable houses are not unmovable assets of Auroville, and can therefore be treated differently in terms of building application and funding.

It could be considered to also keep the common infrastructure dismountable so that when the time comes, everything can be moved to a new location. When an inhabitant wants to move to a new location, there are 2 options for what can be done. Either the person gets the value of the unit (minus the depreciation over time) forwarded to his permanent house or the whole unit can be dismounted and taken to a new (permanent) location provided it has planning permission.

Other common and shared infrastructures

• locker drawers,  
• Laundry (6 – 10 pers. / machine)
• Storeroom
• Solid waste
• Parking
• Gardens / landscaping

Designs

Transit Lounge common House (click on title to view the common house You-tube link)

Common shared infrastructure: There will be shared kitchen in a common building that will function as dining space, common recreational area with interest, lounge space and other facilities.

• Kitchen / dining
• Recreation
• Lounge
• Shower / composite Toilets
• Parking
• Greywater treatment / Resource Recovery Station
• Laundry
• Storeroom

FAMC has agreed to advance the intial infrastructure costs for the common facilities and residents will pay a monthly contribution towards the expenses / maintanence of the same.

Temporary Houses

Few houses are presented here, but in the first presentation by Manu for l'Avenir d'Auroville there were more. They will appear here too. 

RHINO by Buildaur A Proposal by Team Buildaur for Transit Lounge

Rolf / Balu Bamboo Design

Designers: Rolf Kalabhumi / Balu

Contact: Rolf: +91 413 2623690 / Balu: +91 9943646822 & +91 413 2623193

Email: aurovillebamboocentre@auroville.org.in; rolfartist@auroville.org.in

''

Size Interior: 12 sqm

Amenities: One Room

Cost: 1.2 lac Cost per sqm: Rs.10,000

Time frame to complete: 3 weeks (two units can be completed in 1 month)

Materials used: Bamboo, bolts, nylon canvas (roofing), Can also do model in mud brick and bamboo.

Dismountable: Yes - can be carried and assembled on spot.

What support do you need? - Orders for the product.

Others: Existing unit in Verite (Guest house opp Bhavana's) Bamboo is treated so that it will not deteriorate. The feeling of the space is wonderful and light. Bamboo is highly sustainable. Bamboo absorbs 28% more CO2 than any other plants.

Container Homes:

Designers Name: Several Chennai based companies / Earthauz

Contact: +91 9884070167

Email: imrenterprises10@gmail.com

Interior size: modular: 20ft or 40 ft long, 8.5 or 9 ft high and 8ft wide.

Cost: 40ft: 2.6 to 3.8 lacs Cost per sqm: Rs.9,500 to 12,800 sqm

Price includes: 6 windows and grills, 1 door. Styrofoam concrete / PVC inner coat, flooring, fans, lights, plud & phone points, fully painted.

Time frame to complete: 2 weeks from order

Materials used: shipping container

Dismountable: Yes

Advantages:

• Fast movable option
• Very versatile secure multiple floors can be stacked 10 high and take 28 tonnes of weight
• Cortlen steel is non corrusive and 75% stronger than normal steel.
• Earth quake resistant.
• Can buy with minimum finishing. Successfully implemented in many cities such as London, Amsterdam, Coke park Scotland.
• Manu, architect living American pavilion is very experience with container homes and is interested in helping source and bring to Auroville.

Disadvantages:

Steel absorbs sun need to insulate therefore needs to be at least 9.6 ft high (not Indian standard). Come insulated but can also use trellis of plants for shase and place off ground on the concrete blocks.

Satprem Maini - Earth Institute:

 

Designers: Satprem Maini / Tesia

Contact: +91 413 2623064 / 2623330

Email: earthinstitute@auroville.org.in

Interior size: 25.13 sqm carpet area + 7 sqm veranda.

Amenities: Living space for two individuals with common space and a covered veranda.

Total cost: Rs.2,08,265

Cost per sqm: Rs.6,964 per sqm in May 2011.

Time frame to complete: 3 weeks for precasting and 12 days to built it. Total 5 weeks.

Materials used: CSEB interlocking D300 for the walls and insulated fibre glass sheets for the roof.

Dismountable: Yes

Foundations: Not dug but done with precast composie beams (U blocks and reinforce concrete) laid with earh mortar.

Walls: Dry interlocking CSEB 300 with 5% cement, grouted with earth concrete (without cement)

Column: Round block 290 laid with steel reinforcements.

Beams: composite beams and mintels (U shape CSEB and reinforced concrete)

Roofs: Fiber glass sheet + thermocol insulation + plywood on metal frame.

Sigi - conceptual Study:

Designer's Name: Sigi

Contact: +91 413 2622938

Email: sigi@auroville.org.in

Interior size: Total 24 sqm Unit: 14 sqm Terrace + roof = 10 sqm

Total Cost: Cost for light build house material and labour sqm:

1 unit = 14 sqm         1 sqm = Rs.8,928 x 14 = Rs. 124, 992

Terrace = 10 sqm with roof insulation            1 sqm = Rs.2950 x 10 = Rs.29,500

Terrace = 10 sqm without insulation              1 sqm = Rs. 1,450 x 10 = Rs.14, 500

Time frame to complete: 3 months if crew and organisation is good.

Materials used: timber, reapers, roof / wall sheets, gibson board, brick floor, glass, mesh

Roof: sheet metal + insulation - false ceiling therefore no need for ventilation.

Base: Concrete beams srewed together filled with sand and cadapa stone on top.

Walls: bibson board inside, sheet metal ormud panels outside. another alternative is wall panels of reinforce red soil.

Can also make in precast or prefabricated.

Dismountable: Yes

Support: Funding to complete a model house. sigi and Volker would like to build a model.

Alok

Designers' Name: Alok - Auroshilpam

Contact: Ph: +91 9443728734 Email: alok@auroville.org.in

    

Interior Size: 17.28 sqm

Costs: Less than 1 lac Cost per sqm: Rs.6000 per sqm

Alok and Sathyavan are working on a dismountable prototype based on Johnny's design with angle iron, plywood, keet, cement legs and mesh.

Alok has a site for six housing models with water and electrics close by.

He would like to attract people who are interested in working on housing and have this site as a living research centre.

Auzolan

Designer's Name: Eric

Contact: Ph: +91 9443362291 Email: auzolan@auroville.org.in

Interior Size: Variety of sizes. 1 module = 18 sqm, 3 modules = 54 sqm etc.

Amenities: As its modular, size and amenities can be added to resident choice.

'Costs including all fittings & all connections for July 2011': 2.7 lacs to 7 lacs Cost per metre: Rs.10,000 - 15,000

Kitchen only:  Rs. 110,000 (rooms to be added)

Bathroom only: Rs. 90,000 (rooms to be added)

Plain room: Rs. 14,500 / sqm

Coverred terrasse: Rs.9,000 / sqm

Eg: 2 rooms, 1 cover terrasse, 1 kitchen/bathroom = (Rs.14,500 x 3 rooms) + (Rs.9,000 x 1 terrasse) + (1 kitchen) + 1 bathroom

                                                                          = (14,500 x 54 sqm) + ( 9,000 x 18 sqm) + 110,000 + 90,000

                                                                          = (783,000 + 162,000 + 110,000 + 90,000

                                                                           = Rs. 11,45,000

Time frame to complete: 10 days per module (18 sqm) Production: 50 modules per year at the moment.

Materials used: durable, dismantable, light-weight, thermal properties:

• Exposed precast concrete frame and foundations: Long life, low maintanence.
• Floor: Kadapa stones (dry fixed)
• Aluminium windows / grill mesh
• Walls: ready made interlocking insulated panels
• Ceiling and overhanf panels: Calcium Silicate board (light weight panels, waterproof, false ceiling ventiliation)
• Mounting parts, clamps, lintels: Galvanized steel
• Roofs: white corrugated steel sheet (Zinc aluminium coated)
• Good standard kitchen and bathroom

Dismountable: YES,

- all materials

- need crane.

Advantages:

•  good ventiliation, no crawling insects.
• Fast, safe and cost effective. The production is 4 times faster than standard housing. One house of 3 modules for a couple with bathroom and kitchen can be built in 2 to 3 weeks. the fabrication takes time (4 modules / 72 sq m per month at the moment).
• We are about to introduce a 1st floor, which will give more dynamics to the architecture, increase the density and reduce the costs.

Johnny

Designers Name: Johnny

Contact: Ph: +91 413 2622390

email: johnnyauroville@gmail.com

Interior size: 12 sq meters

Amenties: One room with terrace

Cost: 1 lac - Rs.50,000 for materials / Rs.50,000 for labour. Cost per sq.meters: 8,333 sqrs.

Time frame to complete: One week once all materials are present.

Materails used: Galvanized iron pipes, Wood, Bison board and mud for structure, Wood louves and mosquito mesh on sides. Structure off ground on concrete pillars and plates.

Others: 1. Julia's house, 70 sq metres was 6 lac. Wattle and 2-3 layers mud, euculyptus and split bamboo. 2. Julia's house could be made on a base of 6 8 4 metres if want to be dismountable.

Peter A's design: "Beyond Johnny"

Designers: Peter A, Luminosity

Contact: Ph: +91 413 2622656 / +91 9488483348 Email: peter@auroville.org.in

Size interior: 15 sqm

Amenties: One room

Cost overall: 1 lac spprox. Cost per sqm: Rs.7,000 sqm

Time frame to complete: One month once prototype is established.

Materials used: Structural system allows for many materials to be used.

• Frame: Steel or timber frame
• Roof: Metal sheet or fibre glass
• Floor: bison board, Bamboo
• Extras: Mesh and glass louvers.
• Also: Light weight, prefab, modular structure, allows for many applications depending on finance and manpower.

Ajay's Living Home

Designer's Name: Ajay Nityananda

Contact: +919626481686 Email: ajnit@yahoo.com

 

  

Size: 125 sq.ft (modular and repeatable)

Cost: Rs. 1.5 - 2 lacs

Timeframe to complete: 6 weeks after all material is sourced and treated.

Materials used: Concrete foundations, Eucalyptus and kalimadu wood, bamboo, mud, cow dung and straw roofing.

The home featured in the photo includes kitchen, living room and sleeping spaces with a beautiful toilet, attached by a bamboo and wood bridge, that crosses a sunken pool. The two main structures look out on a courtyard area with fitted seating. All structures are made of natural materials. Ajay has designed a smaller prototype (see size and cost details above) for the Transit Lounge which would be suitable for self build. While the structure is not dis-mountable it is dismantable. Pre-fabrication time would approximately be 4 weeks and Erection time would be approximately 2 weeks after all material is sourced and treated.

Balaji's Palmyra House - A sketch.

Designer:

Contact: +91 9444582868

Email: amuthanbalaji@gmail.com

Materials used: Palm wood beams and rafers / coconut wood flooring / coconut wood & a  corrugated Tetrapak for roofing / Palm wood (sliding) panels.

Cost: The estimated cost of 3.5 lacs could be reduced with the option of kadappa instead of wood flooring and only corrugated Tetrapak for roofing. also individuals can opt for mu-plastering with in the wooden wall frames. This would reduce the cost of the two level house to 2.6 lacs. further, introducing keet for roofing instead of tetrapak shets would bring costs down to 2.2 lacs.

Inspired by the dormitory neing built at "The International House" this plam house was initially conceived to be a single floor building and later developed to be two storeed!

The walls are solid plam planks / wood panels that acts both as wall panels and as sliding doors... and are STACK'able!!! i nto railings provided all through the sides the roof will be of two layers - with coconut wood and corrugated tetrapak sheets on top

Temporary common infrastructures

Designs for common infrastructures are being worked on by Manu's team in International House.

Joining

If you want to join this project contact l'Avenir d'Auroville as soon as possible.

See also

Auroville Radio:

The Small De-Mountable House - interview with Johnny about his design

Dis-mountable Housing - recording of the presentation on friday April 15th 2011.

Transit Houding - Interview with Dorle and Manu about the project

Transit Lounge, volunteers - In "today's news" a short report on Wednesday May 04th 2011 meeting behind Courage community where the actual site of this kind of temporary community should be.

News and Notes:

News & Notes number 392, 9 April 2011 - Contains invitation for Dis-mountable housing project meeting of April 15th 2011.

TEAM BUILDAUR'S PROPOSAL FOR TRANSIT LOUNGE:

Buildaur, a unit of Kattida Kalai Trust under Auroville Foundation, is an organization dedicated to building a sustainable living environment through its work in the field of architecture, interior design, exhibition and product design and construction. This proposal for Transit Lounge was prepared by Team Buildaur to introduce a variety of materials to the community so that the resident can choose out of the palette available and different cost options possible to create a humble dwelling in this project. Material Palette and the building techniques proposed in various design options here by us reflects our committment to ecologically, socially, culturally and economically relevant materials for built environment. Most of these proposed materials have been used by Buildaur and its collaborators in various projects in Auroville and elsewhere in India.

Material Palette:1, 2 & 3 http://wiki.auroville.org.in/w/index.php?title=File:Transit_lounge_material_palette3.jpg&oldid=6716

http://wiki.auroville.org.in/w/index.php?title=File:Transit_lounge_material_palette2.jpg&oldid=6715

http://wiki.auroville.org.in/w/index.php?title=File:Transit_lounge_material_palette.jpg&oldid=6714

Design Variations: 1, 2 & 3 http://wiki.auroville.org.in/w/index.php?title=File:Rhino_5-_60.pdf&oldid=6712

http://wiki.auroville.org.in/w/index.php?title=File:Rhino_4-_36.pdf&oldid=6711

http://wiki.auroville.org.in/w/index.php?title=File:Rhino_2-_33.pdf&oldid=6710

Cost Sheet: Owner Driven Design; http://wiki.auroville.org.in/w/index.php?title=File:Transit_lounge_cost_sheet.pdf&oldid=6713